Ⅰ.Technical Index：

（1）Appearance；light yellow transparent viscous liquid

（2）Solid Content（%）：14±2

（3）Viscosity（cps/25℃）：300-900

（4）Solvent：DMF、MEK

Ⅱ.Effect Overview：

（1）Good brightness and transparency；

（2）Good color development；

（3）Excellent injection molding effect；

Ⅲ.Recommended Processing Technology：

（1）100 Mesh or 120 Mesh Printing; Drying at 110 ℃ -130 ℃

Ⅳ.Precautions：

（1）Do not mix water vapor in use；

（2）General hazardous chemicals, with a storage period of 6 months; Viscosity should be retested before use for more than 6 months；

（3）This product is stored at 5 ℃ -35 ℃, in a cool and dry place, protected from sun and rain, and sealed immediately after use；

（4）The prepared slurry shall be used within 24h and shall be stirred again before use；

Disclaimer：the indicators and suggestions involved in this manual are provided according to the characteristics of the product. Due to the differences in raw materials and production process conditions of customers, it needs to be adjusted according to the actual production situation. Please do a sample test before mass production to determine the availability of materials, otherwise our company will not bear the quality responsibility arising therefrom.

1st Edition 2021